1 5 0 wa t t o p e n f r a m e s w i t c h i n g p o w e r s u p p l y w i t h p f c p m k 1 5 0 s e r i e s www.astrodyne.co m astrodyne usa: 1-800-823-8082 astrodyne europe: 353 51 561060 astrodyne pacific: 886-2-26983458 150 watts output power single and dual outputs universal 90-264vac input 5vdc to 48vdc outputs 3000vac input to output isolation active power factor correction model number output voltage output amps (max) line regulation ripple & noise single output pmk150s-5 5 vdc 30 0.5% 100mv pk-pk pmk150s-12 12 vdc 12.5 0.5% 100mv pk-pk pmk150s-15 15 vdc 10 0.5% 100mv pk-pk pmk150s-24 24 vdc 6.3 0.5% 100mv pk-pk pmk150s-48 48 vdc 3.2 0.5% 100mv pk-pk dual output PMK150D-A 5/12 vdc 15/7 0.5/1% 50/100mv pk-pk pmk150d-b 5/24 vdc 15/3.5 0.5/2% 50/200mv pk-pk pmk150d-c 12/24 vdc 7/3.5 1/2% 100/200mv pk-pk pmk150d-d 12/48 vdc 7/1.5 1/4% 100/400mv pk-pk 3w x 5.5l x 1.4h
1 5 0 wa t t o p e n f r a m e s w i t c h i n g p o w e r s u p p l y w i t h p f c p m k 1 5 0 s e r i e s www.astrodyne.co m astrodyne usa: 1-800-823-8082 astrodyne europe: 353 51 561060 astrodyne pacific: 886-2-26983458 input specifications input voltage range 90-264 vac frequency range 47-63 hz power factor correction 0.96 to 0.98 inrush current, typ: 30a @ 115vac 60a @ 230vac * output specifications voltage and current (note 6) see selection chart line regulation (note 8) see selection chart load regulation (10%-fl, note 7) singles: 0.5%, typ duals: 3/5%, typ preset accuracy (note 9) 1%, typ dc voltage adjust (typ) 6%, typ temperature coefficient 0.05%/c ripple/noise (notes 1, 3, 10) see selection chart over voltage protection latching, auto recover after fault condition is removed * short circuit protection latching, auto recover after fault condition is removed * hold up time 20ms, typ (nom i/p, fl) general specifications isolation (note 4) i/p-o/p: 3000vac i/p-ground: 2000vac o/p-ground: 500 vac efficiency 75%, min. switching frequency 67khz, (fixed, typical) safety ul,tuv, cb, ce environm ental specifications oper. temperature -10 to +70c (see derate curve) storage temperature -25 to +85c * relative humidity 0% to +95%, non-cond * emc en55011 class b mtbf 270,000 hrs mil std 217, 25c physical specifications size 3 x 5.5 x 1.4 construction open frame weight 0.5 lb, (226g) notes * these are stress ratings. exposure of the devices to any of these conditions may adversely affect long term reliability. proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. all specifications are typical at nominal input, full load, and 25c unless other - wise noted astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 1. all measurements should be made directly at the terminals of the power supply 2. all specifications typical @ 25c, unless otherwise noted, at nominal line and load. 3. ripple and noise dependent upon output voltage as specified per particular model. 4. isolation for up to 1 minute duration. 5. specified for free air convection cooling. 6. minimum load is not required for proper operation. 7. load regulation is measured by change 40% of measured output load from 60% full load, with the other output set to 60% full load. 8. line regulation measured from 90-264vac. 100vac minimum required for full load start. 9. preset accuracy measured at nominal load, 120vac input. 10. o/p noise measured directly at the pins/terminals at nominal load, 0.1uf bypass and 47uf electrolytic, pk-pk @ 20mhz bandwidth.
1 5 0 wa t t o p e n f r a m e s w i t c h i n g p o w e r s u p p l y w i t h p f c p m k 1 5 0 s e r i e s www.astrodyne.co m astrodyne usa: 1-800-823-8082 astrodyne europe: 353 51 561060 astrodyne pacific: 886-2-26983458 2. 00 0 .5 0 mm 0. 07 9 0. 02 0 i n [ ] 5. 70 mm [0 .2 24 in ] 13 4. 00 mm [5 .2 76 in ] 13 9. 70 mm [5 .5 00 in ] 5 . 0 0 m m [ 0 . 1 9 7 i n ] 7 1 . 2 0 m m [ 2 . 8 0 3 i n ] 7 6 . 2 0 m m [ 3 . 0 0 0 i n ] 4_ ? 3.40 mm [0.134 in ] 35.00 mm [1.378 in ] 1 2 3 9 8 7 6 5 4 m echanical dimensions pin # outputs 1 gnd 2 acn 3 acl 4 + output 5 + output 6 common 7 common 8 common 9 n/c
1 5 0 wa t t o p e n f r a m e s w i t c h i n g p o w e r s u p p l y w i t h p f c p m k 1 5 0 s e r i e s www.astrodyne.co m astrodyne usa: 1-800-823-8082 astrodyne europe: 353 51 561060 astrodyne pacific: 886-2-26983458 output derating curve - s ingle output output derating curve - d ual output 1. forced air colling 10 cfm 2. free air convection - open frame, u-channel 3. free air convection - enclosed
|
